How I Became An Expert on Floors

How Professionals Do Hardwood Floor Refinishing? When it comes to hardwood floor refinishing, homeowners should know that planning and patience and skill won’t be enough as they ought to have specialized equipment as well. This project is something that requires research, knowledge and time out of all other home improvement projects that homeowners can have. You will go through different steps or stages that include preparing, evaluating, sanding as well as sealing your hardwood floors. Even a slight touch of mistake is more than enough to cause problems that may last for a long time in any of the said stages or steps. Yes, you can refinish the entire hardwood flooring alone but, it is wise that you get some help at some parts. It will take around 1 to 3 weeks to carry out refinishing for this kind of flooring. Step 1. Checking the hardwood floor – it is your job to determine whether or not the hardwood floor planks is a laborious process. It is essential to assess the floor if it has suffered from water, pet urine or spills. In an effort to see if the boards are very thin to be sanded, you can pull up one threshold of the door. Additionally, you need to figure out if the last sealant was varnish, wax or polyurethane. Of course, to know if the hardwood flooring have deep gouges or dramatic wear patters, you’ve got to give it a thorough examination.
Short Course on Resources – Getting to Square 1
Step 2. Preparing the flooring – just before you perform hardwood floor refinishing, you’ve got to prepare the floor first. If most of the hardwood planks don’t have scratches or holes, are at least 3/4 inches thick and have same amount of sealant, then you’re all set to start with the preparation.
Smart Tips For Uncovering Resources
First thing that you’ve got to do is clean the whole floor area. It is vital as well to file holes from nails, staples or scrapes. You need to pull up the thresholds as well as the baseboards too. You need to do all the floors to keep it consistent even if one of the floors not looks good. Step 3. Sanding – without a doubt, this step is the most demanding and the most daunting that you would do. You will be renting drum sander equipment, which is quite loud to use and, you need to roll it onto the entire hardwood flooring 3x to be able to peel off the top layer of the finish. Step 4. Staining and sealing – just before you start with this step, you must ensure that every bit of sawdust is gone so it doesn’t contaminate the sealing and staining applications. Once you’re done staining the floor, you now have to seal it with thin layer of sealant to be sure that the stain is dried completely prior to application.